N&W Global Vending Krea Скачать руководство пользователя страница 9

Страница: 9 / 72

© by N&W GLOBAL VENDING S.p.A.

03 - 2011 3685 00

POSITIONING OF THE VENDING MACHINE

The machine is not suitable for outside installations, it

needs to be installed inside dry premises, with tempera-

ture between 2° C and 32° C and it cannot be installed in

environments in which jets of water are used for cleaning

(i.e.: large kitchens, etc.).

The machine shall be positioned next to a wall and in

such a way that the back of it is at a minimum distance

of 4 cm from the wall in order to allow regular ventilation.

The machine shall not be covered with cloths or similar.

The machine shall be positioned so that the maximum

inclination does not exceed 2°.

If needed, level it out using the appropriate adjustable

feet provided with the machine.

Important!!

In the event of unscheduled maintenance interventions

and/or repairs, the vending machine can be accessed

from the back.

The possibility should therefore be envisaged of rotating

the machine so that the back panel can be removed.

Positioning over cabinet

The machine can be positioned over a table or another

suitable support (suggested height 800 mm).

Where possible, it is advisable to use the special cabinet

which can house the waste container, the water supply

tank and the descaler if the water is very hard.

TECHNICAL CHARACTERISTICS

Height

mm 650

Height with coffee container

750

Dimensions with open top

1,000

Width

mm 410

Depth

mm 564

Dimensions with open door

855

Weight without packaging

Power supply voltage

V∿

230-240

Power supply frequency

Installed power

1950

aymENT

sysTEm

The machine is supplied with electrical arrangement

for systems with protocol Executive, BDV, MDB and for

monitoring 24 Vdc validators.

Apart from the coin mech housing, there is space for

the optional installation of the most common payment

systems.

alEs

pricEs

A different price can be programmed for each selection;

The standard setting foresees the same sales price for

all selections.

aTEr

supply

Water supply from mains with water pressure between

0.05 and 0.85 Mpa (0.5 and 8.5 Bar).

The machine's software is arranged for controlling the

water supply from an internal tank (optional kit which can

be placed in the service cabinet).

Fig. 2

LLLLLLLL

LLLLL

LLLLLLLL

LLLLLLL LLLL

LLLLLLLLLLLLLLL

LLLLLLLLLLLLLL

LLLLLLLLLLLLLLL

LLLLLLLL

LLLLLLLLLL

650

410

750

1000

564

855

Содержание Krea









































































Результаты поиска

Содержание Krea

Отзывы:

N&W Global Vending Krea, Установка - Использование - Обслуживание, Страница: 9 / 72

Результаты поиска

Содержание Krea

Отзывы: