N&W Global Vending Krea, Установка - Использование - Обслуживание

Страница: 11 / 72

© by N&W GLOBAL VENDING S.p.A.
5
03 - 2011 3685 00
p
oWEr coNsumpTioN
The power consumption of the machine depends on
many factors, including the temperature and ventilation
of the environment where the machine is located, the
temperature of the inlet water, the boiler temperature,
etc.
A measurement at a room temperature of 22 °C was
carried out and the following power consumption was
detected:
Reaching the temperature
Wh
24h standby: Wh
The power consumption calculated on the above-men-
tioned average data shall be deemed as purely indica-
tive.
a
ccEssoriEs
The machine can be fitted with a wide range of accesso -
ries in order to vary its performances:
The installation kits are supplied with installation and
test instructions, which shall be scrupulously followed in
order to maintain the safety of the machine.
The installation and the subsequent test operations
shall be performed by qualified personnel, with
specific knowledge of the operation of the machine
both from the point of view of electrical safety and
of hygiene.
VARIABLE COMBINATION LOCKS
Some models are supplied with a variable combination
lock.
The lock has a silver-coloured key with the standard
combination to be used for normal opening and closing
operations.
It is possible to customise the locks using a kit, available
as an accessory, which allows the lock combination to
be changed.
The kit is composed of a change key (black) for chang-
ing the standard combination and of change keys (gold)
and use keys (silver) for changing and using the new
combinations.
Change and use key packs with other combinations can
be supplied on request.
Furthermore, other use key (silver) packs can be re-
quested specifying the combination printed on the keys.
Usually the use key (silver) is the only one used, where-
as the combination change keys (gold) may be kept as
spare keys.
Avoid using the change keys for normal opening as
this could damage the lock.
To change the combination:
-Open the door of the machine to avoid forcing rotation;
-Lightly lubricate using a spray inside the lock;
-Insert the current change key (black) and turn it to the
change position (reference notch at 120°);
-Extract the current change key and insert the change
key (gold) with the new combination;
-Turn to the closing position (0°) and extract the change
key.
The lock has now assumed the new combination.
The keys of the old combination can no longer be
used for the new combination.
Fig. 4
0∞
90
∞
120
∞