![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016050.webp)
6. ADJUSTMENT FOR OPERATION
To return to the test menu, press the PI Start switch.
Start switch
(Note) The above diagram shows a pair control panel. For a single control
panel (when two JAMMAVIDEO STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
installed with the PC board is the PI unit.
To exit from the test mode, follow the procedures described in “6-I-3 Exiting from
test mode” 32).
6-8 A.D.S. (checking data of past game results)
This screen is used to check the data of past game play results such as the total
play hours.
Follow steps through
Selection of adjustment item” (P. 30 and
31). In step
select ‘A.D.S.”
To return to the test menu, press the PI Start switch.
Start switch
\
8
(Note) The above diagram shows a pair control panel. For a single control
panel (when two JAMMAVIDEO STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
installed with the PC board is the PI unit.
To exit from the test mode, follow the procedures described in ‘6-l-3 Exiting from
test mode” (P. 32).
6-9 DATA CLEAR (deleting data and resetting to defaults)
Data is retained when the power is off. The Data Clear function is used to delete
the stored data and reset to defaults.
Follow steps
“6-l-Z Selection of adjustment item” (P. 30 and P. 31).
In step select “DATA CLEAR.”