![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016043.webp)
6. ADJUSTMENT FOR OPERATION
Press the PI Start switch to exit from the display test and return to the test menu
screen. The Test Menu screen (P. 30) appears. To make other adjustments in the
Display Test, press the Button switch 1 and display the adjustment screen.
To exit from the test mode, follow the procedures described in
“6-l-3 Exiting from
test mode” 32).
B u t t o n s w i t c h 2
PI Button switch
PI Start switch
(Note) The above diagram shows a pair control panel. For a single control
panel (when two
STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
installed with the PC board is the unit.
6-3 INPUT TEST (testing switches)
Use the input test function to test the switches connected to the PC board, such as
the buttons on the control panel.
Follow steps through
‘6-l-2 Selection of adjustment item” 30 and P.
31). In
select “INPUT TEST.”
The following screen is displayed.
Operate the levers and switches on the control panel in sequence.
‘When the lever or button is operated, the corresponding indication on the
screen turns red.
Start switch
PI
I N P U T T E S T
start
start
s w i t c h o n - -
U P
Service
the cabinet
Right
Button
2
Button switches
: O F F
2 : O F F 3 : O F F 4 : O F F
DIP
activation
(Note)
COIN 1 and COIN 2 show current data.
(When there is only one coin counter, the COIN 2 display
remains at