![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016044.webp)
6. ADJUSTMENT FOR OPERATION
l
If the screen indications do not change according to the lever/button
operations, the game cannot be played properly. When it happens, refer to
P. 52
Troubleshooting.”
To return to the test menu screen, press the PI Sutton switches and 2 simulta-
neously.
(Note) The above diagram shows a pair control panel. For a single control
panel (when two
STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
installed with the PC board is the PI unit.
To exit from the test mode, follow the procedures described in “6-l-3 Exiting from
test mode” (P. 32).
6-4 SOUND TEST (testing and setting sound)
This screen is used to test the sound output and to make the monaural or stereo
speaker setting.
Follow steps through in “6-l-2 Selection of adjustment item” (P. 30 and P.
31). In step
select “SOUND TEST.”
The following screen will be displayed.
S O U N D T E S T
Current
setting
Check Sound
:
Change Speaker : Pl-Left/Right
EXIT
: