![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016013.webp)
5. INSTALLATION AND CONNECTION
be conducted bv a technician
Before installing and connecting the product, turn off the power switch on the cabinet
and unplug the power cord from the service outlet to prevent an electric shock.
l
Do not install or connect the product outdoors. The product is designed for indoor
use only. Installation or connection of the product conducted outdoors can cause an
electrical shock or fire.
l
Make sure the person conducting the installation or connection is not
charged with static electricity. Static electricity can cause a malfunction
or damage of this product.
Do not perform a conductivity test using a tester. The internal voltage in a
tester can damage the
on the PC board and render the PC board
useless.
The product can be used with a
STANDARD or
VIDEO STANDARD
(JVS) conforming
cabinet. However, the connection method varies depending on the type of the cabinet.
To install the product in a
STANDARD conforming cabinet, the
PC board kit (optional)
is required.
Check the cabinet specification for compatibility by referring to 6 “2. SPECIFICATIONS.”
Sections in the Operation Manual applicable to each STANDARD
Check the specification of the cabinet and read the sections described below according to the STAN-
DARD applicable to the cabinet.
Connection to
STANDARD conforming cabinet:
Connect the PC board according to the directions in the operation manual supplied with the
PC board kit (optional), then read the sections marked with
on pages
through 12, and the sections marked
pages 15 through 20 of this Operation Manual.
l
Connection to
STANDARD (JVS) conforming cabinet:
Read the sections marked
on pages 10 through 12, and the sections marked with
on pages 22 thmugh 24 of this Operation Manual.
l
The product cannot be connected to a
VIDEO STANDARD (JVS) conforming
cabinet installed with the
PC board kit (optional).