![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016027.webp)
5. INSTALLATION AND CONNECTION To be conducted by a technician only
Turn
off the power switch on the cabinet, and unplug the power cord from the
service outlet.
If the control panel is different from the one shown on the previous page, replace
the control panel by following the directions in the operation manual of the cabinet,
or add/remove button switches as necessary. When button switches are removed,
be sure to cover the holes with caps.
By referring to the table on the previous page and the directions in the operation
manual of the cabinet, make sure that the levers and switches on the control panel
are connected correctly to the control panel connection terminals provided on the
cabinet. If not, correct the connections.
Control panel connection terminals
l
If
the
button
switches have
three terminals
each, connect the input
etc.) of the control panel connection terminals to the N.O.
terminals of the
button switches, and GND of the control panel connection
terminal to the COM terminals.
If the button switches
terminals each, the wires can be connected
to either terminal.
Connecting the cable
Use the following power supplies of the cabinet connected with the power cord.
.
power supply allowed voltage fluctuation
current: 7 A or higher
l
power supply allowed voltage fluctuation&%, current: 2 A or higher
Use of non-conforming power supply can cause a fire.
Turn off
the power switch on the cabinet, and unplug the power cord from the
outlet.