![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016036.webp)
6. ADJUSTMENT FOR OPERATION
6-I-3 Exiting from test mode
making each adjustment according to the procedures described from “6-2
DISPLAY TEST” 32) to
DATA CLEAR” (P.
display the test menu screen.
Move the I-direction lever up or down and turn the “EXIT SAVE” indication
red.
Press the PI Button switch 1.
The test mode ends, and the display returns to the game screen.
PI 8-direction lever
, PI Button switch 1
(Note) The above diagram shows a pair control panel. For a single control
panel (when two
STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
Installed with the PC board is the PI unit.
Set the Option switch to OFF.
l
When using the test switch of the cabinet, set the test switch to OFF.
Be sure to use the method described above to exit from the test mode. If
the above procedures are not followed for exiting from the test mode, the
adjustments (changes or settings) may not be reflected properly. (Setting
the test switch to OFF without selecting “EXIT SAVE” will not end the
test mode.)
6-2 DISPLAY TEST (checking and adjusting screen display)
This test mode allows the following checks and adjustments
Color edit
Check and adjustment of contrast and color balance of video signals output
from PC board
l
Convergence
Check and adjustment of display size, display position, aspect ratio and distor-
tion of displayed images
l
Color bar
Check and adjustment of contrast and color balance of displayed images
Interlace check
‘Only when monitor’s horizontal synchronization frequency is 15.75
Switching between interlace and non-interlace