![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016038.webp)
6. ADJUSTMENT FOR OPERATION
Press the Button switch 1 to move to another adjustment item.
l
Every time the button is pressed, the mode and screen change in the
following order: COLOR
CONVERGENCE INTERLACE CHECK
Button switch 1
PI Start switch
Button switch 3
(Note) The above diagram shows a pair control panel. For a single control
panel (when two
STANDARD (JVS) conforming cabinet
cabinets are connected for communication-linked setup), the cabinet
installed with the PC board is the unit.
According to the adjustment item, follow the procedures described in “6-2-2 CON-
VERGENCE” 34) or “6-2-3 COLOR EDIT, COLOR BAR” (P. 35).
Press the Pi Start switch to exit from the DISPLAY TEST and return to the test
menu screen.
The test menu screen
30) appears.
To exit from the test mode, follow the directions in “6-1-3 Exiting from test mode”
32).
CONVERGENCE (checking and adjusting display size, display posi-
tion, aspect ratio and distortion)
Follow the step
in
Common procedures” 33) to display the
Convergence screen.
l
If the Display Test screen is already displayed, skip the
in common
procedures.
Check to make sure the screen display size is correct and the displayed lattice
pattern has no distortion.