![background image](http://html2.mh-extra.com/html/namco/tekken-4/tekken-4_operation-manual_3168016010.webp)
2. SPECIFICATIONS
Item
Compatibility
Weight
Input power
Operating environ-
ment
Connectable cabinet
Monitor orientation
and monitor signal
l i n k e d s e t u p
Control panel of
c a b i n e t
M e t h o d o f i n s t a l l a t i o n
i n c a b i n e t
STANDARD
PC board kit (optional) is required)
VIDEO STANDARD
mm
mm
mm
5.8
kg .
(When connected to
STANDARD connectors]
(7 A minimum) and
(2 A minimum)
(When connected to
VIDEO STANDARD connectors]
(7 A minimum) and
(2 A minimum)
use only
Temperature: 5 to
humidity: to 85% (no dew condensation)
STANDARD conforming cabinet
PC board kit (optional) is required)
VIDEO STANDARD (JVS) conforming cabinet
Monitor orientation:
Horizontal synchmnization frequency: 15.75
(factory setting), can be changed to 31.5
Scan fly-back line type:
[when set to 15.75
Non-interlace (factory setting), can be changed to interlace”
[when set to 31.5
Non-interlace
RGB output level: 0.7 Vp-p
l
Note that the RGB output level is as follows when
PC board kit (optional) is
i n s t a l l e d :
Can be switched:
(factory setting)
(5)
Synchronizing signal: Can be switched between Composite (factory setting) I Seperate
Vertical
frequency: 60.0 Hz
Competition game possible with one PC board when two
VIDEO STANDARD (JVS)
ing cabinets are connected by a cable.
[Pair control panel (for two-person play
single cabinet)]
l
a-direction lever
1 x 2
Button switch
4 x 2
Start switch
1 x 2
[Single control panel (for communication-linked setup
two cabinets connected with cable)]
For each cabinet
lever
1
Button switch
4
l
Start switch
1
According to the operation manual of the cabinet
‘1
STANDARD
S t a n d a r d s e s t a b l i s h e d
by Japan Amusement Machinery Manufacturers Association
in 1986 for edge
Of video
boards.
VIDEO STANDARD (JVS)
Standards established by Japan Amusement Machinery Manufacturers Association
in 1996 for connection between video
game PC boards and peripheral devices.
‘3 Regarding
switching of the
frequency, refer
Option switches’ ‘6-1-l Adjustment switches
and knob” on page 29.
‘4 Regarding
switching of non-interlace and
refer
CHECK on page 37.
‘5 Seep. 29 “6-l-l Adjustment switches, knobs
Option Switch’ to switch
output level.