MP SERIES™ Battery Backup System for Traffic Signals: MP2000E System
Volume One: Operating Manual
Page 6-7
Instructions for switching from Normal to Generator Mode are located in Section 6.b.10.
Figure 6-4: Generator / Normal Mode
6.b.3 The Self-Test
The Self-Test confirms that the unit can transfer into and out of Battery Mode while supporting
the output load at the same time.
Caution: This procedure should not be performed when critical loads that
depend on the unit for backup power are running.
Note: The duration of the self-test can be adjusted via RS232 / USB menu.
See Section 6.c for details.
Figure 6-5: LCD Screen in Self-Test Mode
Normal Parameters
Normal Line Generator or Noisy Line
Generator Parameters
Normal Parameters
Line Mode
Generator Parameters
Normal and Generator Parameters
