62
M1.3.TIG200PAC.NLFREN 21052019
EN
5 Output volt-ampere characteristics
This welder is of CC output characteristics. The volt-ampere characteristic shows maximum output voltage and maximum output
current. All other welding parameters are within the curve range. Please note the volt-ampere characteristics curves of various
welding modes below:
11
/
50
E201 SC-A0
Remote control is available
This welder is capable of pedal remote control, allowing operator’s control on real time
welding current even further than 10m.
Perfect auto memory
This welder can automatically save accumulated starting up time, accumulated power-on time,
accumulated welding time, accumulated argon arc welding time, accumulated MMA welding
time, accumulated alarm time, accumulated over-heat time, accumulated undervoltage time,
accumulated over-voltage time, etc. to FLASH memorizer so that to provide data for possible
maintenance.
6. OUTPUT VOLT-AMPERE CHARACTERISTICS
This welder is of CC output characteristics. The volt-ampere characteristic shows max output
voltage and max output current. All other welding parameters are within the curve range. Please note the
volt-ampere characteristics curves of various welding modes in below.
MMA
Lift Arc
HF Arc Start
Fig 6.1 Volt-ampere Characteristics Curve
Note: Lift arc is not a standard function but instead is depending on customer’s actual
requirements.
7. ORDER INFORMATION
Model
Function
Production
Code
TIG160PACDC
Hot start, anti-stick, arc force, lift
arc,VRD
Null
TIG200PACDC
Hot start, anti-stick, arc force, lift
arc,VRD
E201
Fig. 5-1 Volt-ampere characteristics curves
Note: Lift arc is not a standard function but instead is depending on customer’s actual requirements�
copyrighted
document
- all
rights
reserved
by
FBC