40
M1.3.TIG200PAC.NLFREN 21052019
FR
8�3 Fonctions des touches
8�3�1 Sélection du mode de soudage
Pressez en fonctionnement à vide. Vous pouvez choisir entre différents modes de soudage. Cette touche est invalide
pendant le soudage. Elle redevient active quand l’appareil fonctionne à nouveau à vide. Voir la description ci-dessous :
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-9 Sélection du mode de soudage
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
8�3�2 Sélection du mode de contrôle de la torche
En mode TIG ou en mode de contrôle digital de la torche, pressez pour sélectionner un mode de contrôle de la torche
adapté à vos exigences
. Cette touche est invalide pendant le soudage. Elle redevient active quand l’appareil fonctionne à
nouveau à vide. Voir la description ci-dessous :
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-10 Sélection des modes de soudage 1
En mode TIG et en mode de réglage de la torche, pressez pour sélectionner un mode de contrôle de la torche adapté
à vos exigences
. Cette touche est invalide pendant le soudage. Elle redevient active quand l’appareil fonctionne à nouveau à
vide. Voir la description ci-dessous :
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-11 Sélection des modes de soudage 2
Soudage à l’arc manuel
Soudage à l’arc
copyrighted
document
- all
rights
reserved
by
FBC
