M1.3.TIG200PAC.NLFREN 21052019
12
NL
8�3 Functies van de toetsen
8�3�1 Selectie van de lasmethode
Druk op wanneer onbelast. U kunt tussen verschillende lasmethodes kiezen. Deze toets is ongeldig tijdens het lassen, en
werkt opnieuw wanneer de machine weer onbelast is. Zie omschrijving hieronder:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Afb. 8-9 Lasmethode selectie
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
8�3�2 Selectie van de lastoorts schakelmodus
In TIG modus of in digitale controle modus van de toorts, druk op om een lastoorts schakelmodus te selecteren, die voor
uw eisen geschikt is. Deze toets is ongeldig tijdens het lassen, en werkt opnieuw wanneer de machine weer onbelast is.
Zie omschrijving hieronder:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Afb. 9-10 Selectie van de lasmethodes 1
In TIG modus en in toortsinstelling modus, druk op om een toorts controle modus te kiezen, die voor uw eisen geschikt is.
Deze toets is ongeldig tijdens het lassen, en werkt opnieuw wanneer de machine weer onbelast is.
Zie omschrijving hieronder:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Afb. 8-11 Selectie van de lasmethodes 2
Manueel booglassen
Booglassen
copyrighted
document
- all
rights
reserved
by
FBC
