MUTOH Rockhopper II Series, Руководство пользователя

Страница: 72 / 190

Rockhopper II series printers – User’s Guide
72
AP-75095, Rev. 2.0, 24/10/03
5.3. USING MEDIA
This section describes details on available media for the printer.
5.3.1. Media type
The type and quality of the media effect the results of drawing enormously. Refer to the description below and
use the appropriate media for your purpose.
The following are the recommended media for the printer. Select the appropriate media for your purpose.
Notes :
•
For more information about the recommended media, contact your local MUTOH
dealer.
•
Problems that occur due to use of media other than those recommended are not
guaranteed.
Notes :
•
When using recommended media, the setting values for the printing quality is set for
each media type.
•
When printing on media other than those specified, information regarding proper
settings for the media type and settings for the product should be found on the
instructions for the media. If not contact the supplier of the media.
5.3.2. Cautions on handling media
When you handle media, please pay attention to the following.
Notes :
•
Use recommended media in an appropriate environment. Following are the
appropriate temperature and humidity ranges for printing.
Temperature Humidity
Recommended working environment 25°C 40% to 60%
Rate of change Within 2°C per hour Within 5% per hour
•
Do not use creased, damaged, torn, curled, or wrapped media.
•
The size of the recommended sheets can change at a fixed ratio according to the
temperature changes of the working environment. Before using sheet media, place the
sheet in the working environment for at least 30 minutes, to have it match to the
temperature of the working area.
•
Printing before the media could accommodate to the printing environment may cause
media jams due to slippage or creases. This also adversely effects the quality of
printing.