MUTOH Rockhopper II Series, Руководство пользователя

Страница: 115 / 190

Rockhopper II series printers – User’s Guide
115
AP-75095, Rev. 2.0, 24/10/03
5.4.68. Write mode menu
To set writing method of printing data to the hard disk and printing method.
Notes :
•
Write mode menu has been displayed if a hard disk has been installed on the product.
•
When writing printing data to the hard disk, be sure to set media in the tray.
The printing data is sized to fit the media.
If there is no media in the tray, the printing data cannot be written.
* WriteMode *
F1
→
OFF Write.Prn
←
F2
F3
→
Write>Prn WriteOnly
←
F4
Current parameter
→
- OFF -
(1/1)
Setup items Parameters Description
<Off> No writing to the hard disk. Performs printing
immediately.
Writing/Printing Prints while writing the data to the hard disk.
Printing after writing Prints after writing the data to the hard disk.
Writes the data to the hard disk without printing.
Note:
Printing method can be set for
printing data saved in the hard disk
by Re-plot menu.
Refer to ‘Re-plot menu’
Writing only
Writing
- To shift to the previous hierarchy menu.
Refer to ‘File management setup menu’
5.4.69. Re-plot menu
Set following items when you want to draw printing data saved in the hard disk.
• File name
• Printing media number
Notes :
•
Re-plot menu is displayed if a hard disk has been installed on the product.
•
When replotting the printing data,
•
Use media of the same size as the printing data.
The size of the printing data will be the same as the initial paper size, even if paper
of a different size has been set, the printing will start from the same printing start
position.
•
Use a cartridge with the same colour and type of ink that will be used during the
printing data write.
If an ink cartridge with differing colours or type is used, it will not print correctly.