MUTOH Rockhopper II Series, Руководство пользователя

Страница: 100 / 190

Rockhopper II series printers – User’s Guide
100
AP-75095, Rev. 2.0, 24/10/03
5.4.36. Command select menu
To make the settings for the conditions of printer commands sent from the computer to the printer.
* Command *
F1
→
ML – GL. GL2
ML – GL2 ←
F2
F3
→
RTL – PASS
Current parameter
→
- RTL –PASS -
(1/1)
Setup items Parameters Description
MH-GL, GL2 To set to MH-GL, GL2.
MH-GL2 To set to MH- GL2.
<RTL-PASS> To set to RTL-PASS.
Command
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.37. Print step menu
To set the units for amount of movement for printing.
* Step *
F1
→
0.010 mm
0.025 mm ←
F2
Current parameter
→
- 0.010 mm -
(1/1)
Setup items Parameters Description
<0.010mm> To set the printing units to 0.010mm.
<0.025mm> To set the printing units to 0.025mm.
Print step
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.38. Print position menu
To set the initial writing position for printing.
* Position *
F1
→
P1 LL
←
F2
F3
→
Full
Current parameter
→
- P1 -
(1/1)
Setup items Parameters Description
<P1> To set the initial location of the scaling point.
LL To set the lower left position of the hard clip.
Full To set the lower left position of the media.
Print position
- To shift to the previous hierarchy menu.
Refer to ‘setup menu’