MUTOH Rockhopper II Series, Руководство пользователя

Страница: 146 / 190

Rockhopper II series printers – User’s Guide
146
AP-75095, Rev. 2.0, 24/10/03
(14) Media size is wrong during media Initial.
No. Possible cause Solutions References
1 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
2 You did not load the media straight
into the printer. Load the media straight
into the printer. Refer to ‘Media handling’
3 The curled surface of media is up
when loading. Remove the curl in the
media, or replace with new
media. Refer to ‘Media handling’
4 You used the printer in a location
with air conditioner or other location
not appropriate for the specified
environment Use the printer in the
specified environment. Refer to ‘Product Specifications’
5 You reused printed media. Use new, not printed
media. Refer to ‘Media type’
(15) Media is crooked while printing.
No. Possible cause Solutions References
1 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
2 The loading position of the media is
not correct. Load the media correctly. Refer to ‘Loading media’
(16) The printer is not connected to a computer using the Centronics interface.
No. Possible cause Solutions References
1 You did not connect the Centronics
interface cable correctly. Connect the Centronics
interface cable correctly. Refer to ‘Connecting the centronics
interface’
2 When the printing data is transferred
from the computer, the DATA lamp
on the operation panel is not lit. If the DATA lamp is not lit,
contact the computer
maker. -
3 The Centronics setting on the printer
does not match the setting on the
computer. Make the Centronics
setting on the printer so
that it matches the setting
on the computer. Refer to ‘System requirements’
4 The type of command that is
currently set, does not match the
command of a computer or a driver. Match the command
setting of the printer to the
environment of a computer
or a driver. Refer to ‘Menu setup on the
operation panel’
(17) The printed lines are blurred.
No. Possible cause Solutions References
1 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
2 You used too thick or too thin media. Use recommended media Refer to ‘Media type’