MUTOH Rockhopper 3 Extreme, Руководство пользователя

Страница: 73 / 137

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
73 AP-75198– Rev. 1.2
6.2.2 [F2] - Cleaning the heads
When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Step 1 :
Verify the following regarding the condition of the printer.
I)
It is not currently printing
Step 2 :
Press the [F2] key of the operation panel.
I)
To shift to the cleaning menu.
Step 3 :
Press the [F1] key or the [F2] key on the operation panel.
I)
The product will perform following operations:
Setup items Key name Parameters Description
Cut & Feed F1 ALL, Head 1 – Head 2 Clean ALL heads or head couple one or two
F2 Little, normal, powerful Set the intensity of a cleaning
Step 4 :
Press the [ENTER] key to start the requested cleaning.
6.2.3 [F3] - Controlling the heater elements
If you want to change or check the heater elements, follow the steps below.
Step 1 :
Verify the following regarding the condition of the printer.
I)
It is not currently printing
Step 2 :
Press the [F3] key of the operation panel.
I)
To shift to the heater menu.
The ‘heater message’ can be one of the following:
±
Heater standby
±
Heater warming up
±
Heater ready
‘A’ stands for the heater.
‘B’ stands for the fixer.
‘C’ stands for the post fixer.
‘D’ stands for the dryer.
‘S’ stands for the Set-temperature (requested temperature).
‘R’ stands for the Real-temperature (actual temperature).