Murr Elektronik Data Panel xtreme DB DP-34044-1 страница 4 Скачать руководство пользователя

Страница: 4 / 54

vision of this End User License, even in the event of the fault, tort (including negligence), strict liability, breach of contract or breach

of warranty of Murrelektronik, or any supplier, and even if Murrelektronik or any supplier has been advised of the possibility of such

damages.

2.5 EXAMPLE OF SYMBOLS

2.5.1 USE OF ATTENTION SIGNS

Notes containing important information are specially marked. These are illustrated as follows:

Attention text...

2.5.2 USE OF DANGER SIGNS

Danger signs are indicated by text and a corresponding symbol inside of a frame

CAUTION!

Disregard of safety measures may result in damage to equipment and other serious consequences.

3. INSTALLATION

3.1 XtremeDB INSTALLATION

The XtremeDB blocks can be mounted directly on an installation panel or on a machine. The module features three mounting

holes for this purpose. It must be assured that the mounting surface is smooth and flat to prevent mechanical stress in the module

housing.

Proper installation and operation of the XtremeDB blocks requires the use of all ground connections. This includes

Ground (A) for module power and Ground (B) for port power on the 18 pin configuration and power plug.

Содержание Data Panel xtreme DB DP-34044-1























































Результаты поиска

Содержание Data Panel xtreme DB DP-34044-1

Отзывы:

Похожие инструкции для Data Panel xtreme DB DP-34044-1

Бренды по названию

Популярные бренды

Murr Elektronik Data Panel xtreme DB DP-34044-1, Руководство пользователя

Результаты поиска

Содержание Data Panel xtreme DB DP-34044-1

Отзывы:

Похожие инструкции для Data Panel xtreme DB DP-34044-1

Бренды по названию

Популярные бренды