Muratec FAX SCANNER, Руководство по установке

Страница: 162 / 187

Just in case
< Common >
What you see on the
LCD
What it means/What to do
Call for service The scanner lamp is dim or inoperable.
Make repeated copies to help evaporate any
internal moisture. If that doesn’t resolve the
problem, call your authorized Muratec dealer or
Muratec Customer Support.
Cannot register Macro key. You cannot register "Last Job" feature to the
Please use Soft key. Macro key. Assign it to a Soft key.
Carriage error The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Drum cartridge Your machine can print about 500 more sheets.
is almost empty 500 It will count down the number of sheets which
can be printed. Please contact your authorized
Muratec dealer soon to purchase a new drum
cartridge if you don’t already have one.
Note: According to the resolution and document
type, your machine may become not to print
before the number of sheets on the
LCD
becomes
to be “0”.
Not avail. with ADF You tried to use the function which cannot be
used in
ADF
. Use the
FBS
glass.
Please call service The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Please correct error first You pressed the Start key when an error has
occurred. Correct the error.
Please wait Your fax machine’s printer is either warming up
or busy. Please wait until the fax is finished
printing and then re-try your command or opera-
tion.
Printing The command you’re trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
Replace Your drum cartridge doesn’t work.
drum cartridge Your machine cannot print until it is replaced
with a new drum cartridge.
Replace it.
Scanner in use The command you’re trying to enter requires the
use of the scanner, which is already in use. Wait
for the fax to complete the scan, then retry the
desired command.
Toner bottle Your machine is almost out of toner.
is empty 50 About 50 more sheets can be printed and your
machine will count down the number of sheets
which can be printed. Please contact your autho-
rized Muratec dealer soon to purchase a new
toner bottle if you don’t already have one.
Note: According to the resolution and document
type, your machine may become not to print
before the number of sheets on the
LCD
becomes
to be “0”.
Toner is empty Your machine is out of toner.
Your machine cannot print until it is replaced
with a new toner bottle.
Replace it.
Too many characters You attempted to enter too many numbers or
other characters in the current operation.
Press [Cancel] to delete the extra characters,
then try again. You may wish to review the oper-
ation’s appropriate instructions.
Too many locations You tried to enter department code more than
100. Your machine can store up to 100 depart-
ment codes.
Too many steps You tried to enter too many steps for a macro.
OK to register? You can enter up to 60 steps into a macro key.
Press [YES] to tell your fax to register these
steps, or press [NO] to cancel the registering.
# of stored page: XXX During scanning of the document, the memory
Keep these pages? overflowed. Press [YES] to tell your fax to keep
as many pages in memory as possible, or press
[NO] to delete from memory all pages stored
during this operation (but not previous opera-
tions).
5.14