
Chapter 3 – RouteFinder Software Operation
Multi-Tech RouteFinder RF650VPN User Guide
84
Add Routes
The RouteFinder itself adds routing entries for directly-connected networks. These routes are called
Interface Routes. Further entries for networks in which the RouteFinder itself is NOT a member must be
made manually (e.g., if there is a second router on the network and a particular network is to be routed to
it, for example if the second router is to be responsible for this network).
Using the menus, select which network is routed onto which interface.
Define Interface Routing
1. Open the Routing menu in the Network directory.
2. Select one of the already-defined networks and a network card from the Interface route select menu.
3. Confirm your entries by clicking the Add button.
After a successful addition, a select menu with the corresponding definitions is created.
You are then offered further functions (i.e., Edit and Delete).
Further Functions
Edit Routing: By clicking the
Edit
button, the definitions are loaded into the entry field. You can then edit
the entry.
Delete Routing: By clicking the
Delete
button, the entry is deleted from the list.