Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 96

Страница: 96 / 202

Chapter 14 – SIM ToolKit

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)

Example:

Initially, all facilities are activated, the PIN is not required and SIM toolkit functionality is activated.

AT+CMEE=1

Enable the reporting of mobile equipment errors

AT+WIND=15

Set indications

AT+STSF?

+STSF: 1,”5FFFFFFF7F”,3

SIM ToolKit functionality activated with all facilities.

+STIN: 0

The main menu has been sent from the SIM.

AT+STIN?

+STIN: 0

AT+STGI=0

Get information about the main menu

+STGI: “SIM TOOLKIT MAIN MENU”

Main menu contains 3 items.

+STGI: 1,3,”BANK”,0

+STGI: 2,3,”QUIZ”,0

+STGI: 3,3,”WEATHER”,0

AT+STIN?

+CME ERROR: 4

Unsolicited Result: SIM ToolKit Control Response
+STCR)

Description:

When the customer application makes an outgoing voice or SMS call when the call control facility is
activated, CALL CONTROL and SMS CONTROL responses can be identified. This is also applicable to SS
calls.

Response syntax:

+STCR: <Result>[,<Number>,<MODestAddr>,<TextInfo>]

<Result>

Control response not allowed

Control response with modification

<Number>

Called number, Service Center Address or SS String in ASCII format

<MODestAddr>

MO destination address in ASCII format

<TextInfo>

Text information in ASCII format

SIM ToolKit Give Response +STGR

Description:

This command allows the application/user to select an item in the main menu or to answer the following
proactive commands:

GET INKEY

Key pressed by the user.

GET INPUT

Message entered by the user.

SELECT ITEM

Selected item.

SETUP CALL

User confirmation.

DISPLAY TEXT

User confirmation to clear the message.

It is also possible to terminate the current proactive command session by sending a Terminal Response to
the SIM with the following parameters:

BACKWARD MOVE

Process a backward move

BEYOND CAPABILITIES

Command beyond ME capabilities

UNABLE TO PROCESS

ME is currently unable to process command

NO RESPONSE

No response from the user

END SESSION

User abort.

Содержание MTCBA-C-IP-N1











































































































































































































Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы:

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 96 / 202

Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы: