manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 59 / 202

Поделиться
Скачать
Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 59

Chapter 10 – V24-V25 Commands 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

59 

 

DTE-DCE Local Flow Control  +IFC 

 

Description:

 

 

This command is used to specify the module DATA port flow control method. The factory default value is 
2,2. The AT&F command restores the value that was active when the last AT&W command was used. 

 

Values: 

 

<Tx>  

0 

None 

Transmit data flow control disabled.  

1 

XON/XOFF  

Remove Xon (0x19) and Xoff (0x17) characters from data stream.  

2 

Hardware  

Use RTS (Request To Send) signal (default)  

3 

XON/XOFF  

Leave Xon (0x19) and Xoff (0x17) characters in data stream. 

 

 <Rx> 

 

0 

None  

Receive data flow control disabled.  

1 

XON/XOFF  

Remove Xon (0x19) and Xoff (0x17) characters from data stream.  

2 

Hardware  

Use CTS (Clear To Send) signal (default) 

 

Syntax:

 

 

Command syntax:

 AT+IFC=<Tx>,<Rx> 

 

Command 

 

Possible Responses 

 

AT+IFC=? 

 

Note: Display valid parameter ranges. 

 

+IFC: (0-3),(0-2) 

 

OK 

 

Note: Valid parameter ranges 

 

AT+IFC? 

 

Note: Display current settings. 

 

+IFC: 2,2 

 

OK 

 

Note: Default values are 2,2 (hardware flow control). 

 

AT+IFC=3 

 

Note: Set Tx flow control to XON/XOFF. 

 

OK 

 

Note: New Tx flow control value set. 

 

AT+IFC=,1 

 

Note: Set Rx flow control to XON/XOFF. 

 

OK 

 

Note: New Rx flow control value set. 

 

AT+IFC? 

 

Note: Display current settings. 

 

+IFC: 3,1 

 

OK 

 

Note: Settings displayed. 

 

AT+IFC=2,2 

 

Note: Set Tx and Rx flow control to 
hardware. 

 

OK 

 

Note: New Tx and Rx flow control values set. 

 

 
 

Set DCD Signal  &C 

 

Description:

 

 

This command is used to specify the behavior of the Data Carrier Detect (DCD) signal on the module DATA 
port. The factory default value is 2. The AT&F command restores the value that was active when the last 
AT&W command was used.   

Values: 

 

<

n

> 

 0 

The DCD signal is always asserted. 

 

1 

The DCD signal is asserted in a call and de-asserted when not in a call.  

Default is 1

 

2 

The DCD signal is always asserted except at the end of a call. At the end of a call, the DCD signal is 
de-asserted for 1 second.  

Syntax:

  

Command syntax:

 AT&C<n> 

 

Command 

 

Possible Responses 

 

AT&C0 

 

Note: DCD always on 

 

OK 

 

Note: Command valid 

 

AT&C1 

 

Note: DCD matches the true state of the call. 

 

OK 

 

Note: Command valid 

 

AT&C2 

 

Note: Wink DCD signal on call disconnect 

 

OK 

 

Note: Command valid 

 

 

Содержание MTCBA-C-IP-N1











































































































































































































Отзывы:

Нет отзывов