manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 30 / 202

Поделиться
Скачать
Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 30

Chapter 5 – Network Service Commands 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

30 

Syntax:  

Command syntax:

 AT+COPS=<mode>,<term> 

 

Command 

 

Possible Responses 

 

AT+COPS? 

 

Note: Ask for current Mode 
Preference 

 

+COPS: 0,0 

 

OK 

 

Note: Automatic mode, use PRL order, Permanent 

 

AT+COPS=? 

 

+COPS: (0-3),(0-1) 

 

OK 

 

Note: Modes: Automatic, CDMA Only, CDMA or AMPS 
only; Term: Permanent, Power Cycle. 

 

AT+COPS=0,0 

 

Note: Ask for Automatic mode 

 

OK 

 

+COPS: 0,0 

 

Note: UnsolCOPS result confirms Automatic 
mode, Permanent term is requested. 

 

AT+COPS=1,1 

 

Note: Ask for CDMA Only mode 

 

OK 

 

+COPS: 1,1 

 

Note: UnsolCOPS result confirms CDMA Only 
mode, Power Cycle term is requested. 

 

AT+COPS=2,0 

 

Note: Ask for CDMA or AMPS only 
mode 

 

OK 

 

+COPS: 2,0 

 

Note: UnsolCOPS result confirms CDMA or 
AMPS only mode, Permanent term is requested. 

 

AT+COPS=3,0 

 

Note: Ask for Analog only mode 

 

OK 

 

+COPS: 3,0 

 

Note: UnsolCOPS result confirms Analog only 
mode, Permanent term is requested. 

 

 
 
 

Band Preference  +WBND 

 

Description:

  

The Band Preference of a CDMA modem governs the basic system acquisition behavior of the MS in 
conjunction with the mode preference (+COPS) and the PRL (Preferring Roaming List). It’s important to note 
that the PRL takes precedence over band preference when guiding the phone to a band. The PRL must 
allow a particular band first, before the band preference can take effect. In other words, a band preference 
change is simply a request; the PRL decides whether or not to allow it. If the setting is accepted by the MS, 
the value will be written to non-volatile RAM and persist after a power-cycle.  

 

Note 1:

 This command is not available in Sprint® and Verizon software versions. 

 

 

Note 2:

 <band> 1 (PCS) is not available in RUIM software versions. 

 

 

Values:

  

The parameter values are the following ones: 

 

 

<band> 

 

0 

Any 

 

1 

PCS

 

2 

Cellular A or B 

 

3 

Cellular A 

 

4 

Cellular B 

 

 

Syntax:

  

Command syntax:

 AT+WBND=<band> 

 

Command 

 

Possible Responses 

 

AT+WBND? 

 

Note: Ask for current Band Preference 

 

+WBND: 0 

 

OK 

 

Note: Any 

 

AT+WBND=? 

 

+WBND: (0-4) 

 

OK 

 

Note: Any, PCS, Cell, Cell A, Cell B 

 

AT+WBND=0 

 

Note: Allow Any Band 

 

OK 

 

 

Содержание MTCBA-C-IP-N1











































































































































































































Отзывы:

Нет отзывов