Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 202

Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 86

Chapter 13 – Specific AT Commands

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)

86

Security PIN +WPIN

Description:

This command sets, enables, or disables the security PIN. When this PIN is enabled, only ATD (emergency
numbers only), ATH, and +WPIN commands will be accepted.

Note 1:

The default value of the WPIN will be the last four digits of the mobile directory number if

configured (+WMDN). See the +WMDN command.

Note 2:

When the security PIN is enabled, the unit will power-up in the “locked” state.

Note 3:

For RUIM software loads, the default value for WPIN is '0000' even if an MDN is present.

Values:

<mode>

0

Disable modem lock

1

Enable modem lock

2

Change the PIN number

3

Verify the PIN. Unlock the modem until reset. Does not change NV enable/disable setting.

4

Enable modem lock upon power up

<current val> & <new val>

0000 – 9999

Syntax:

Command syntax:

AT+WPIN=<mode>,<current val>,<new val>

Command

Possible Responses

AT+WPIN=0,1111

Note: Disable the security PIN

OK

AT+WPIN?

Note: Query the current state

+WPIN: 0

OK

Note: PIN disabled

AT+WPIN=1,2222

Note: Enable the security PIN

+CME ERROR: 44

Note: Invalid PIN

AT+WPIN=1,1111

Note: Enable the security PIN

OK

AT+WPIN?

Note: Query the current state

+WPIN: 1

OK

Note: PIN enabled

AT+WPIN=2,1111,5555

Note: Change the security PIN
code from 1111 to 5555

OK

AT+CSQ?

+CME ERROR: 44

Note: Modem is locked, only ATD & +WPIN commands will be
accepted

ATD8585551212;

+CME ERROR: 44

Note: Modem is locked, only emergency numbers accepted using ATD.

AT+WPIN=0,5555

Note: Disable the security PIN

OK

AT+WPIN=3,5555

Note: Verify the security PIN

+CME ERROR: 44

Note: Wrong PIN value entered. Modem locked.

AT+WPIN=3,0000

Note: Verify the security PIN

OK

Note: Correct PIN value entered. Modem unlocked.

AT+WPIN=4,0000

Note: Power up modem lock

OK

Note: Modem locked at power up.

Request PRL Version Information +WPRL

Description:

This command requests PRL Version information for the currently selected NAM.

Syntax:

Command syntax:

AT+WPRL?

Command

Possible Responses

AT+WPRL?

Note: Request current NAM’s PRL version

+WPRL: 1024

OK

AT+WPRL?

Note: Request current NAM’s PRL version

+CME ERROR: 41

Note: PRL request invalid because there’s no PRL loaded.

Note:

The range for PRL is a 16-bit type.

«
...
84
85
86
87
88
...
»

Содержание MTCBA-C-IP-N1











































































































































































































Отзывы:

Нет отзывов