Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 192

Страница: 192 / 202

Chapter 24 – Sprint® Specific AT Commands

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)

192

Syntax:

Command syntax:

AT+CSS Returns: <Class>,<Band>,<SID>,<BS_P_REV>,<CHANNEL>

Command

Possible Responses

AT+CSS?

Note: Display the current setting

+CSS: 2, A, 4145, 6, 334

Note: Command is valid

AT+CSS=?

Note: Display the range of setting

+CSS:

Note: Command is valid however range display is not supported
for this command due to carrier-specific requirements.

Packet Zone Identifier +PZID

Description:

This is a read-only command that displays the Packet Zone Id for the mobile IP.

Values:

Numeric value in range 0 - 255

Syntax:

Command syntax

: AT+PZID

Command

Possible Responses

AT+PZID

Note: Display the packet zone ID.

+PZID: 1

Boot URL +WBURL

Description:

This command is used to read and write the boot URL value. This value is required for IOTA connections.

Values:

<string>

128 character maximum length string value.

Default:

http://hcmci.iota.spcsdns.net:8080/ciip

Syntax:

Command syntax:

AT+WBURL=<string>

Command

Possible Responses

AT+WBURL?

Note: Display the current boot URL value.

http://hcmci.iota.spcsdns.net:8080/ciip

AT+WBURL=http://hcmci.iota.spcsdns.net/ciip

Note: Set the boot URL value.

Note: New value set.

AT+WBURL=””

Note: Set invalid URL value.

+CERROR: BAD REQUEST

Note: Error message displayed.

Trusted Domain +WTDMN

Description:

This command is used to read and write the trusted domain value. This value is required for IOTA
connections and is used to verify the trusted server connection.

Values:

<string>

32 character maximum length string value. Default: https:.iota.spcsdns.net

Syntax:

Command syntax:

AT+WTDMN=<string>

Command

Possible Responses

AT+WTDMN?

Note: Display the current trusted domain value.

https:.iota.spcsdns.com

AT+WTDMN=https:.iota.spcsdns.net

Note: Set the trusted domain value.

Note: New value set.

AT+ WTDMN =””

Note: Set invalid URL value.

+CERROR: BAD REQUEST

Note: Error message displayed.

Proxy Address +WDPXY

Description:

This command is used to read and write the proxy server address. The proxy server address is required for
IOTA connections.

Values:

<string>

32 character maximum length string value in URL format.

Default:

68.28.31.1

Syntax:

Command syntax:

AT+WDPXY=<address>

Command

Possible Responses

AT+WDPXY?

Note: Display the current proxy server address value.

68.28.31.2

AT+WDPXY=68.28.31.1

Note: Set the proxy server address value.

Note: New value set.

AT+ WDPXY =””

Note: Set invalid address value.

+CERROR: BAD REQUEST

Note: Error message displayed.

Содержание MTCBA-C-IP-N1











































































































































































































Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы:

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 192 / 202

Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы: