Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 129

Страница: 129 / 202

Chapter 18 – Qualcomm Defined AT Commands for CDMA Operation

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)

129

Answer Incoming Voice Call $QCCAV

Description:

This command is used to provide a means to answer an incoming voice call via an AT command.

Syntax:

Command syntax:

AT$QCCAV

Command

Possible Responses

AT$QCCAV

Note: Answer incoming voice call

+WCNT: 3 Note: Command is valid

Automatic Packet Detection $QCPKND

Description:

This command is used to enable or disable Automatic Packet Detection after a dial command.

Values:

<Val>

Disable Packet No Dial. If a PPP packet is received by the mobile without a just prior dial command
(that is, ATD#nnn e.g. ATD#777), then the mobile will originate a Packet (or QNC) data call.

Enable Packet No Dial. Reception of a PPP packet without a just prior dial command will NOT
Originate a PPP packet (or QNC) call.

Syntax:

Command syntax:

AT$QCPKND=<Val>

Command

Possible Responses

AT$QCPKND?

Note: Display the current setting

$QCPKND: 0

OK Note: Command is valid

AT$QCPKND=?

Note: Display the range of values

$QCPKND: (0-1)

OK Note: Command is valid

AT$QCPKND=1

Note: Enable Packet No Dial

OK
Note: Command is valid

Pre-arrangement Setting $QCVAD

Description:

This command is used to respond to a page message that has a voice service option with a page response
that has a data service option.

Values:

<Val>

Off

Fax for next call

Fax for all calls

Async for next call

Async for all calls

Syntax:

Command syntax:

AT$QCVAD= <Val>

Command

Possible Responses

AT$QCVAD?

Note: Display the current setting

$QCVAD: 0

OK Note: Command is valid

AT$QCVAD=?

Note: Display the range of values

$QCVAD: (0-4)

OK Note: Command is valid

AT$QCVAD=1

Note: Set fax for next call

Note: Command is valid

Set DM Baud Rate $QCDMR

Description:

This command is used to set the DM baud rate.

Values:

<Val>

value should be one of the following: 19200, 38400, 57600, 115200

Syntax:

Command syntax:

AT$QCDMR= <Val>

Command

Possible Responses

AT$QCDMR?

Note: Display the current setting

$QCDMR: 19200

OK Note: Command is valid

AT$QCDMR=?

Note: Display the range of values

$QCDMR: (19200, 38400, 57600, 115200, 230400, 460800)

OK Note: Command is valid

AT$QCDMR=115200

Note: Set DM baud rate to 115200

Note: Command is valid

Содержание MTCBA-C-IP-N1











































































































































































































Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы:

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 129 / 202

Результаты поиска

Содержание MTCBA-C-IP-N1

Отзывы: