manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Справочное руководство, Страница: 33 / 202

Поделиться
Скачать
Multitech MTCBA-C-IP-N1 Скачать руководство пользователя страница 33

Chapter 5 – Network Service Commands 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

33 

 

Emergency Mode  +WSOS 

 

Description:   

In the event of an emergency call, the modem will automatically put itself into emergency mode. After the 
call has ended and/or emergency mode is no longer desired, this command must be sent to exit the modem 
out of emergency mode.  

 

Note:

 Changing the mode preference using +COPS while emergency mode is in effect will exit the modem 

out of Emergency Mode. 

 

 

Note

: For RUIM capable modems, the emergency numbers 110, 112, 119, and 120 are also supported by 

the modem software in addition to 911. 

 

 

Values:

  

The parameters values are the following ones: 

 

 

<flag> 

 

0 

Exit Emergency Mode 

 

1 

Manually enter Emergency Mode (not supported)  

Note:

  AT+WSOS by itself is a short-hand equivalent to AT+WSOS=0. 

 

 

Syntax:

   

Command syntax:

 AT+WSOS=<flag>  

Command 

 

Possible Responses 

 

AT+WSOS? 

 

Note: Ask for current Emergency Mode status 

 

+WSOS: 1 

 

OK 

 

AT+WSOS=? 

 

+WSOS: (0-0) 

 

OK 

 

AT+WSOS 

 

Note: Exit Emergency Mode. 

 

Note2: This is the same as AT+WSOS=0 

 

OK 

 

+WSOS:0 

 

Note: UnsolWSOS result confirms Emergency 
Mode exit 

 

AT+WSOS=0 

 

Note: Exit Emergency Mode. 

 

OK 

 

+WSOS:0 

 

Note: UnsolWSOS result confirms Emergency 
Mode exit 

 

AT+WSOS=1 

 

Note: Try to manually enter Emergency Mode. 
This is not allowed. 

 

ERROR 

 

Note: This is not allowed. Emergency Mode will only be 
entered as a result of an emergency call 

 

ATD911; 

 

Note: Emergency Mode entered as the result 
of an emergency call 

 

+WSOS: 1 

 

+WORG: 911 

 

AT+COPS=0,0 

 

Note: Changing the mode preference while in 
Emergency Mode, will result in Emergency 
Mode being exited 

 

+WSOS: 0 

 

+COPS: 0,0 

 

Note: An unsolicited response for both +WSOS and 
+COPS are returned when mode preference is changed 
while in Emergency Mode. 

 

 

Содержание MTCBA-C-IP-N1











































































































































































































Отзывы:

Нет отзывов