SW
31
Innovation. Quality. Performance. Best in Industry. Worldwide.
File Settings
The File Settings function of the PSS Project Settings allows the operator to search through files and folders on
the system to locate specific job files and extensions after identifying the Default Directory and selecting the file
name. If the Project Settings option is selected without a project open, the Open Project dialog box will open and
prompt the operator to select a project before beginning the cutting sequence. At this point, the operator may
select the Project Settings option and proceed with the job file.
A. Default Directory displays the path currently specified for the application to follow when searching for files
with the .uc extension. The operator can browse the drive(s) of the host PC to locate the appropriate directory
with the Browse button to the right of the edit box
. Once the correct path has been determined and the
appropriate directory has been located, the operator may select
OK
.
B. File Names consists of several edit boxes, each specifying the path and file name of the appropriate file.
The operator can browse the drive(s) of the host PC to locate the appropriate directory with the Browse button
to the right of the edit box
. Once the correct path has been determined and the correct file is displayed in
the dialog box, the operator can either highlight the file of interest and select
Open
or double-click the file to
open it automatically.
1.
Init File
of extension .uc is the initialization file of the application.
2.
Setup File
is of extension .htm.
3.
NVRAM
is of extension .uc.
4.
Firmware
of extension .bin is the application interpreter with the controller with files written in assembler
language.
5.
SelfTest
is of extension .uc, .ini, .txt.
6.
Units
is
of
extension
.uc,
.ini,
.txt.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
