MI
61
Innovation. Quality. Performance. Best in Industry. Worldwide.
Laser Cal
The Laser Calibration function allows the operator to gauge the wattage being used during the cutting sequence.
A power meter is needed to complete this function, and operators are encouraged to periodically run the Laser Cal
process to maintain the system.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Utility is highlighted in blue.
3. Press
Enter
to access the Utility sub-menu.
4. Press
X-axis Jog Arrows
until Laser Cal is highlighted in blue.
5. Press
Enter
to access the Laser Cal sub-menu.
6. Press
X-axis Jog Arrows
until the appropriate option is highlighted. The recommended number of
samples is 10 with a frequency of 12KHz for a more accurate setting.
7. Press
Enter
to begin the calibration process. The value is then stored in the controller until changed by the
operator.
8. Press
Cancel
to return to the Utility sub-menu.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
