manualshive.com logo in svg

MTI Matrix System 1210, Руководство пользователя

Поделиться
Скачать
MTI Matrix System 1210 Скачать руководство пользователя страница 26

Descriptions

26

Chain. Selected components remain continually connected to the signal path during
component rotation, A/B comparisons and normal component selection unless changed or
deactivated.

•

Speaker Setting –

 Autosound Speakers tend to pop unless removed from the signal path

during a component change. Therefore, setting the DIP Switch for 

Speaker 

causes that

Chain to adhere to the dropout delay parameter set on the MVP Control Module DIP
Switch. For home audio speaker switching, you may set this DIP switch to “component,”
since most home audio Speakers don’t have this problem.

Regardless of the settings of DIP switch #2 and #3, setting a Chain for Speaker
automatically enables the Auto-Rotate feature. It also disables the “Bypass” option.

NOTE:

Complete information about DIP switches and their settings is contained in
Appendix A of this manual.

MVP Blank Chain Module

When configuring MVP Control Panel you may want to consider future growth and the need to add more

Dual Chain or Feature Modules. For this purpose, the Blank Chain Module (MVP-BCM), which matches the

dimensions of the Dual Chain Module, reserves space on the display front for future switching requirements.

When the future does arrive, simply remove the Blank Chain Module and install a Dual Chain or Feature

Module into its place.

Содержание Matrix System 1210














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды