Starters
45
To assembly the starter pulley assembly:
1. Install a new starter rope in the recoil pulley assembly.
1a.
Remove the old rope from the pulley.
1b.
Cut a piece of #3 1/2 (7/64”) starter rope 43”
(109 cm) long.
1c.
Insert the new piece of rope through the hole in
the starter pulley.
1d.
Tie a half hitch knot at the end of the rope.
1e.
Press the knot into the grove in the starter pul-
ley.
2.
Lightly lubricate the post that the recoil pulley assem-
bly fits over with a good quality lithium base grease.
3.
Install the pulley assembly into the starter housing
assembly. See Figure 6.10.
4.
Install a new retaining ring.
5.
Pass the free end of the starter rope through the eye-
let in the starter housing.
6.
Tie a slip knot in the recoil rope to keep it from getting
pulled back through the eyelet.
7.
Wind the rope onto the pulley until there is enough
tension to consistently draw the recoil handle up
against the eyelet.
Figure 6.8
Figure 6.9
Lubricate the post
Figure 6.10
Pulley assembly
For Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Содержание 25cc
