MSA SUPREMA Touch Скачать руководство пользователя страница 51

Страница: 51 / 309

SUPREMATouch

Operation of the System

MSA

Text [English]

Field type: Display

The English value for this measuring range is displayed here.

Text [local]

Field type: Display

The value in local language for this measuring range is displayed here.

Field type: Button

By tapping this button, the completed settings for the selected measuring range are applied.

Cancel

Field type: Button

By tapping this button, the completed settings for the selected measuring range are discarded.

Dimensions

Fig. 24

“Dimensions”

This window makes is possible to view dimensions provided and to adjust some predefined

changeable dimensions.

Dimensions can be selected arbitrarily. Identical names are not allowed and will be rejected with

the message: “Error: Name not unique!”

The functions of the individual fields are described below:

ID [ID of this Dimension]

Field type: Choice

A dimension can be selected by means of its ID.

Содержание SUPREMA Touch



















































































































































































































































































































Результаты поиска

Содержание SUPREMA Touch

Отзывы:

MSA SUPREMA Touch, Инструкция по установке и обслуживанию, Страница: 51 / 309

Результаты поиска

Содержание SUPREMA Touch

Отзывы: