MSA AUER ALTAIR, Руководство по эксплуатации

Страница: 48 / 352

GB
OPERATION MSA
16
ALTAIR
TM
Operating Manual
3.3. Displaying the instrument data
(1) By pressing the [TEST] key, the stored instrument data can be called up
( Æ Fig. 5).
This includes:
ƒ the current gas concentration
ƒ the test gas mode
ƒ the value for the lower reaction point ("
LO
" "
ALARM
")
ƒ the value for the upper reaction point ("
HI
" "
ALARM
")
ƒ the minimum oxygen concentration ("
LO
") – only for oxygen version
ƒ the measured peak values ("
HI
", "
LO
")
The measured peak values can be deleted. For this, press the test
button when displaying the relevant value.
During the display of the peak value, press the [TEST] key:
ƒ Value is deleted
ƒ "
CLR
" is displayed
ƒ The alarm duration in hours (hour glass, "
HRS
" and numeric value)
ƒ
The IR mode
ƒ If an IR interface is detected in the test mode, the instrument bypasses
the IR mode.
ƒ If no IR interface is detected in test mode within 30 s, or the [TEST] key
is pressed, the instrument exits this mode.