After displaying "EATi", press the "
▼
" , "EWTi" will show. Press the "
▲
", "EATE"
will show.
Display "EWTi" said the drainage time, in seconds, press the "Start / End", shows
the value and the button flashes, through "
▲
", "
▼
" to change the value, then
press "Start / End" to confirm. Only solid is program effective, the default is 240
seconds.
After displaying "EWTi", press the "
▼
", "PULS" shows up, if press "
▲
" , "EATi"
after.
Display "PULS" said the sterilization pulsation frequency, in seconds, press the
"Start / End", then shows the value and flashes, through "
▲
", "
▼
" to change the
value, and press "Start / End" to confirm. Only custom solid class program
effectively, default 0.
After displaying "PULS", press the "
▼
" , "drti" displayed, if press "
▲
" , "EWTi"
after.
Display "drti" said the drying time, in minutes, press the "Start / End", then
shows the value and flashes, through "
▲
", "
▼
" to change value, press "Start /
End" to confirm. Only custom solid program valid, default is 10.
After displaying "drti", press the "
▼
", "tEFA" displayed, if press "
▲
", "ESTi" after.
Display "tEFA" indicates the temperature calibration factor, press the "Start /
End", then shows the value and flashes, through "
▲
", "
▼
" to change value, press
"start / end" to confirm, and users are strictly prohibited to modify.
When displaying "tEFA" , press the "
▼
", "tErF" displayed, if press "
▲
", "drti"
displayed.
Display "tErF" indicates the temperature deviation, press the "Start / End", then
shows the value and flashes, through "
▲
", "
▼
" to change value, press "start /
end" to confirm, users are strictly prohibited to modify.
After displaying "tErF", press the "
▼
", "iwti" shows up, after pressing the "
▲
",
"tEFA" shows up, so as the cycle.
After the parameter modification is complete, press the "Start / End" and
"temperature" button both for 5 seconds to save the parameters and exit the
menu.
Production debugging, temperature sensor calibration:
