manualshive.com logo in svg

MR tapcon 240, Руководство по эксплуатации

Поделиться
Скачать
MR tapcon 240 Скачать руководство пользователя страница 137

7 Functions and settings

Maschinenfabrik Reinhausen 2014

137

222/08 EN

TAPCON® 240

To assign the network address, proceed as follows:

1.

 > 

 Configuration > 

 Continue > 

 Continue > 

 Con-

tinue > 

 Comm. interface 2 > Press 

 until the desired parameter

is displayed.

ð

Network address CIC2.

2.

Press 

 to highlight the desired position.

ð

The position is highlighted and the value can be changed.

3.

Press 

 to increase the value or 

 to reduce it.

4.

Press 

.

ð

The network address is assigned.

Assigning the TCP port

You can use this parameter to assign a TCP port to the device. If you want
to connect the device by means of Ethernet, you need to set a valid TCP
port.

To assign the TCP port, proceed as follows:

1.

 > 

 Configuration > 

 Continue > 

 Continue > 

 Con-

tinue > 

 Comm. interface 2 > Press 

 until the desired parameter

is displayed.

ð

TCP Port CIC2.

2.

Press 

 to highlight the position.

ð

The position is highlighted and the value can be changed.

3.

Press 

 to increase the value or 

 to reduce it.

4.

Press 

.

ð

The TCP port is assigned.

Setting the transmission delay time for the RS485 interface

You can use this parameter to set a send delay for the interface, for exam-
ple, to compensate for the reaction time of an external RS485/RS232 trans-
former when changing between transmitting and receiving operation.

To set the transmission delay time for the RS485 interface, proceed as fol-
lows:

7.15.4

7.15.5

Содержание tapcon 240















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды