manualshive.com logo in svg

MR tapcon 240, Руководство по эксплуатации

Поделиться
Скачать
MR tapcon 240 Скачать руководство пользователя страница 13

2 Safety

Maschinenfabrik Reinhausen 2014

13

222/08 EN

TAPCON® 240

Personnel qualification

The product is designed solely for use in electrical energy systems and facili-
ties operated by appropriately trained staff. This staff comprises people who
are familiar with the installation, assembly, commissioning and operation of
such products.

Operator's duty of care

To prevent accidents, disruptions and damage as well as unacceptable ad-
verse effects on the environment, those responsible for transport, installa-
tion, operation, maintenance and disposal of the product or parts of the prod-
uct must ensure the following:
▪

All warning and hazard notices are complied with.

▪

Personnel are instructed regularly in all relevant aspects of operational
safety, the operating instructions and particularly the safety instructions
contained therein.

▪

Regulations and operating instructions for safe working as well as the
relevant instructions for staff procedures in the case of accidents and
fires are kept on hand at all times and are displayed in the workplace
where applicable.

▪

The product is only used when in a sound operational condition and
safety equipment in particular is checked regularly for operational relia-
bility.

▪

Only replacement parts, lubricants and auxiliary materials which are au-
thorized by the manufacturer are used.

▪

The specified operating conditions and requirements of the installation
location are complied with.

▪

All necessary devices and personal protective equipment for the specific
activity are made available.

▪

The prescribed maintenance intervals and the relevant regulations are
complied with.

▪

Installation, electrical connection and commissioning of the product may
only be carried out by qualified and trained personnel in accordance
with this technical file.

▪

The operator must ensure appropriate use of the product.

2.4

2.5

Содержание tapcon 240















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды