MR MSENSE VAM, Руководство по эксплуатации, Страница: 95 / 174

8 Operation
Maschinenfabrik Reinhausen GmbH 2021 95 6796573/02 EN MSENSE
®
VAM
2. Active part
– Temperature monitoring [ ► Section 8.7.8, Page 104]
3. On-load tap-changer
– OLTC data [ ► Section 8.7.9, Page 105]
4. Power grid
– Tap position monitoring [ ► Section 8.7.10, Page 105]
8.7.1 Menu Settings > Parameters > General
In this menu, you can make general settings and prepare the settings for
web-based visualization:
Settings Parameters General
Name Value
Language English
Commissioning wizard Yes
Auto-logout Off
Time until auto-logout 15.0 min
Measured value display Primary values
Transformer name Transformer
Remote behavior Hardware and SCADA
USB interface Off
Service user access activation Activated
SNMP Agent Off
Home
Events
Information
Recorder
Settings
EN CHANGE REBOOT admin 14.04.2020 14:22
Figure 73: General
General settings
▪ Language
– With this setting, you can specify the device display language.
– The display language can also be set via the status bar [ ► Section 7.3,
Page 70]
▪ Commissioning wizard
– Information on how to set whether the commissioning wizard starts up
once the device is restarted is available here [ ► Page 96].
▪ Auto-logout
– You can use this to set whether a user is to be logged out automatically
in the event of a long period of inactivity.
▪ Transformer name
– Enter the transformer name for identification.
▪ Remote behavior
– Information on how to set the remote behavior is available here [ ► Sec-
tion 8.7.1.1, Page 96].