manualshive.com logo in svg

MR MSENSE VAM, Руководство по эксплуатации, Страница: 14 / 174

Поделиться
Скачать
MR MSENSE VAM Скачать руководство пользователя страница 14

2 Safety

Maschinenfabrik Reinhausen GmbH 2021

14

6796573/02 EN

MSENSE

®

 VAM

Electrically skilled person

The electrically skilled person has a technical qualification and therefore has
the required knowledge and experience, and is also conversant with the ap-
plicable standards and regulations. The electrically skilled person is also pro-
ficient in the following:

▪ Can identify potential dangers independently and is able to avoid them.

▪ Is able to perform work on electrical systems.

▪ Is specially trained for the working environment in which (s)he works.

▪ Must satisfy the requirements of the applicable statutory regulations for

accident prevention.

Electrically trained persons

An electrically trained person receives instruction and guidance from an
electrically skilled person in relation to the tasks undertaken and the poten-
tial dangers in the event of inappropriate handling as well as the protective
devices and safety measures. The electrically trained person works exclu-
sively under the guidance and supervision of an electrically skilled person.

Operator

The operator uses and operates the product in line with this technical file.
The operating company provides the operator with instruction and training
on the specific tasks and the associated potential dangers arising from im-
proper handling.

Technical Service

We strongly recommend having maintenance, repairs and retrofitting carried
out by our Technical Service department. This ensures that all work is per-
formed correctly. If maintenance is not carried out by our Technical Service
department, please ensure that the personnel who carry out the mainte-
nance are trained and authorized by Maschinenfabrik Reinhausen GmbH to
carry out the work.

Authorized personnel

Authorized personnel are trained by Maschinenfabrik Reinhausen GmbH to
carry out special maintenance.

2.5 Personal protective equipment

Personal protective equipment must be worn during work to minimize risks to
health.

▪ Always wear the personal protective equipment required for the job at

hand.

▪ Never wear damaged personal protective equipment.

▪ Observe information about personal protective equipment provided in the

work area.

Содержание MSENSE VAM















































































































































































Отзывы:

Нет отзывов