manualshive.com logo in svg

MR MSENSE VAM, Руководство по эксплуатации

Поделиться
Скачать
MR MSENSE VAM Скачать руководство пользователя страница 22

4 Product description

Maschinenfabrik Reinhausen GmbH 2021

22

6796573/02 EN

MSENSE

®

 VAM

Using the implemented algorithms, the monitoring system can reliably detect
any potential anomalies that occur in the vibro-acoustic signal progression,
taking the temperature variations of the on-load tap-changer oil into account.

Status message

The MSENSE® VAM monitoring system produces a 3-stage status mes-
sage:

Status

Device/visualization dis-
play

SCADA/digital output re-
mote signaling

Normal

OK message through blue
status message

No remote signaling

Warning

The first and the second
anomalies in an evaluation
cluster are indicated via a
yellow status message in
the VAM analysis (Infor-
mation menu).

No remote signaling

Alarm

A third anomaly arising in
an evaluation cluster or
the third successive anom-
aly triggers an additional
event message (Events
menu).

This event message is
transmitted to a connected
SCADA system.

In addition, it can also be
sent to a digital output.

4.4 Performance features

The MSENSE® VAM monitoring system monitors the vibro-acoustic signals
from on-load tap-changers and has the following :

▪ Monitoring on-load tap-changers/reactors in accordance with the technical

specification in the order confirmation

▪ Suitable for on-load tap-changers with oil-switch and vacuum-switch tech-

nology

▪ Recording of the vibro-acoustic signals during on-load tap-changer opera-

tion via automatic triggering

▪ Evaluation of the vibro-acoustic signal progression with regard to time and

amplitude anomalies

▪ Self-learning limit value at an oil temperature above 15 °C, which moves

towards the signal progression with increasing tap-change frequency Ap-
proximately 5 tap-change operations per evaluation cluster (e.g. 5x from
step 1 to step 2 in reverse tap-change operation) are necessary before
the first limit value curve is displayed.
The signals are also evaluated below 15 °C, but the limit value is not ad-
justed.

▪ Display and recording of the measured and calculated values

▪ Status messages via digital outputs

▪ Web-based visualization

Содержание MSENSE VAM















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды