manualshive.com logo in svg

MR MSENSE VAM, Руководство по эксплуатации

Поделиться
Скачать
MR MSENSE VAM Скачать руководство пользователя страница 127

8 Operation

Maschinenfabrik Reinhausen GmbH 2021

127

6796573/02 EN

MSENSE

®

 VAM

Proceed as follows to configure the data points:

1. Go to 

Settings > Data point configuration

.

2. Adjust the data points as required.

3. Press the 

Accept

 button to adopt the modified list of data points.

4. Restart the device to activate the modified list of data points.

8.7.11.7.6 Resetting the data point configuration to factory settings

If you want to reset the data point configuration to factory settings, proceed
as follows:

1. Go to 

Settings > Data point configuration

.

2. Press the 

Reset

 button.

ð

The message Reset appears.

3. Press the 

Yes

 button to reset the data point configuration to the factory

settings.

4. Restart the device to activate the modified list of data points.

8.7.11.7.7 Exporting and importing the data point configuration

You can export the data point configuration, e.g., to back it up or import it
into another device. You will find more information in the Import/Export Man-
ager section.

8.8 Menu Settings > Events

The events have the following properties:

Property

Description

Event status

Active: The event is pending.

Inactive: The event is not pending.

High active

(not configurable)

High active: The device generates a signal if the event is
pending.

Low active: The device generates a signal for as long as
the event is not pending. If the event is pending, the sig-
nal is reset.

Can be set multiple
times

(not configurable)

The event can be triggered several times without having
been deactivated in the meantime.

Acknowledgeable

(not configurable)

Acknowledgeable events must be acknowledged in the
event overview so that they are no longer displayed. All
other events are automatically removed once the cause is
remedied (e.g. limit value no longer exceeded).

Event name

Brief name of event. If you delete all of the text, the stan-
dard text is displayed.

Event description

Description of event. If you delete all of the text, the stan-
dard text is displayed.

Содержание MSENSE VAM















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды