NPort 9000 Series CLI
Commands
2-71
NPort S9650I-16-2HV(config-serif) # tcpserver local-tcp-port 4005
2.3.3.14 tcpclient
To configure the parameters of TCP Client mode for specified serial port.
Commands
tcpclient alive-check
minute
tcpclient inactivity
milli-second
tcpclient ignore-jammed-ip {enable|disable}
tcpclient [dest-ip1
ip-address
] [dest-port1
tcp-port
]
tcpclient [dest-ip2
ip-address
] [dest-port2
tcp-port
]
tcpclient [dest-ip3
ip-address
] [dest-port3
tcp-port
]
tcpclient [dest-ip4
ip-address
] [dest-port4
tcp-port
]
tcpclient local-port1
tcp-port
tcpclient local-port2
tcp-port
tcpclient local-port3
tcp-port
tcpclient local-port4
tcp-port
no tcpclient dest-ip1
no tcpclient dest-ip2
no tcpclient dest-ip3
no tcpclient dest-ip4
tcpclient conn-ctrl {startup-none | anychar-none | anychar-inactivity | dsron-off | dsron-none |
dcdon-off | dcdon-none}
Syntax
Description
tcpclient
To configure the parameters of TCP Client mode.
alive-check
TCP alive check time specifies how long the device server will wait for a
response to "keep alive" packets before closing the TCP connection.
inactivity
Inactivity time specifies how long the device server will wait for incoming
and outgoing data through the serial port before closing the TCP
connection.
ignore-jammed-i
p
When in multiple connection, if there are any remote sides happen
connection problem, the device should ignore these sides and keep send
serial-to-Ethernet data or stop send.
dest-ip1
1st destination IP address specifies an IP address allows the device
server to connect actively to the remote host.
dest-ip2
2nd destination IP address specifies an IP address allows the device
server to connect actively to the remote host.
dest-ip3
3rd destination IP address specifies an IP address allows the device
server to connect actively to the remote host.
dest-ip4
4th destination IP address specifies an IP address allows the device
server to connect actively to the remote host.
dest-port1
1st destination port specifies the TCP port number allows the device
server to connect actively to the remote host.
dest-port2
2nd destination port specifies the TCP port number allows the device
server to connect actively to the remote host.
dest-port3
3rd destination port specifies the TCP port number allows the device
server to connect actively to the remote host.
dest-port4
4th destination port specifies the TCP port number allows the device
server to connect actively to the remote host.
local-port1
1st designated local port specifies the desired local port number of the
device server for this TCP connection.
local-port2
2nd designated local port specifies the desired local port number of the
device server for this TCP connection.
local-port3
3rd designated local port specifies the desired local port number of the
