Moxa Technologies NPort S9000 Series, Руководство пользователя

Страница: 67 / 93

NPort 9000 Series CLI Commands
2-60
2.3.1.21 port-security
Use the port-security interface configuration command on the device server to add a static unicast
MAC-address on a specified port. Use the no form of this command to remove the specified MAC address.
Commands
port-security
MAC-address
no port-security MAC-address
Syntax
Description port-security Set port security
MAC-address MAC address XX:XX:XX:XX:XX:XX
Defaults N/A
Permission Admin group
Usage
Guidelines N/A
Examples
NPort S9650I-16-2HV(config-if)# port-security 00:00:00:00:00:01
2.3.1.22 dot1x auth
Use the dot1x auth interface configuration command on the device server to enable port 802.1x authenticate.
Use the no form of this command to return to the default setting.
Commands
dot1x auth
no dot1x auth
Syntax
Description dot1x 802.1x setting
auth 802.1x port authentication enable/disable
Defaults 802.1x port authentication default disable
Permission Admin group
Usage
Guidelines N/A
Examples
NPort S9650I-16-2HV(config-if)# dot1x auth
2.3.1.23 gmrp
Use the gmrp interface configuration command on the device server to active the IEEE 802.1D-1998 GMRP
(GARP Multicast Registration Protocol). Use the no form of this command to stop this function.
Commands
gmrp
no gmrp
Syntax
Description gmrp Enable GMRP (GARP Multicast Registration Protocol)
Defaults gmrp is default disable
Permission Admin group
Usage
Guidelines N/A
Examples
NPort S9650I-16-2HV(config-if)# gmrp