Moxa Technologies NPort S9000 Series, Руководство пользователя

Страница: 59 / 93

NPort 9000 Series CLI Commands
2-52
2.3.1.4 trunk-mode
Use the trunk-mode interface configuration command on the device server to set the trunk mode of the
specified trunk group. Use the no form of this command to return to the default setting.
Commands
trunk-mode { static | lacp }
no trunk-mode
Syntax
Description trunk-mode Trunk mode configuration
static Configure as static trunk
lacp Configure as LACP trunk
Defaults The default trunk mode of creating trunk manually is static.
Permission Admin group
Usage
Guidelines N/A
Examples
NPORT S9650I-16-2HV(config-if)# trunk-mode static
2.3.1.5 shutdown
To disable an interface, use the shutdown interface configuration command. To restart a disabled interface,
use the no form of this command.
Commands
shutdown
no shutdown
Syntax
Description shutdown Shutdown the selected interface
Defaults N/A
Permission Admin group
Usage
Guidelines N/A
Examples
NPORT S9650I-16-2HV(config-if)# shutdown
NPORT S9650I-16-2HV(config-if)# no shutdown
2.3.1.6 name
Use the name interface configuration command to configure the interface name. To remove the configuration,
use the no form of this command.
Commands
name
no name
Syntax
Description name Port name
Defaults N/A
Permission Admin group
Usage
Guidelines N/A
Examples
NPORT S9650I-16-2HV(config)# interface ethernet 1/1
NPORT S9650I-16-2HV(config-if)# name interface1_port1
NPORT S9650I-16-2HV(config-if)# no name