Moxa Technologies NPort S9000 Series Скачать руководство пользователя

Страница: 55 / 93

NPort 9000 Series CLI

Commands

2-48

2.2.93 system-log network

To configure which events will be logged locally and/or remotely by the device server.

Commands
system-log network local
no system-log network local
system-log network remote
no system-log network remote

Syntax
Description

system-log

To enable the system log according to different event group.

network

This event group includes: DHCP/BOOTP/PPPoE Get IP/Renew,
NTP, Mail Fail, NTP Connect Fail, DHCP Fail, IP Conflict, Ethernet
Link Down.

local

The events will be logged in device server’s local database.

remote

The events will be logged to remote sys-log server.

Defaults

The default settings are all disabled

Permission

Admin group

Usage
Guidelines

To enable remote log function, the user also has to configure SysLog Server Settings.

Examples

Model(config)# system-log network local
Model(config)# no system-log network remote

2.2.94 system-log config

To configure which events will be logged locally and/or remotely by the device server.

Commands
system-log config local
no system-log config local
system-log config remote
no system-log config remote

Syntax
Description

system-log

To enable the system log according to different event group.

config

This event group includes: Login Fail, IP Changed, Password Changed,
Config Changed, Firmware Upgrade, SSL Key Import, Config Import,
Config Export.

local

The events will be logged in device server’s local database.

remote

The events will be logged to remote sys-log server.

Defaults

The default settings are all disabled

Permission

Admin group

Usage
Guidelines

To enable remote log function, the user also has to configure SysLog Server Settings.

Examples

Model(config)# system-log config local
Model(config)# no system-log config remote

Содержание NPort S9000 Series





























































































Результаты поиска

Содержание NPort S9000 Series

Отзывы:

Похожие инструкции для NPort S9000 Series

Бренды по названию

Популярные бренды

Moxa Technologies NPort S9000 Series, Руководство пользователя

Результаты поиска

Содержание NPort S9000 Series

Отзывы:

Похожие инструкции для NPort S9000 Series

Бренды по названию

Популярные бренды