NPort 9000 Series CLI
Commands
2-38
2.2.69 email-warning send test email
Use
email-warning send test email
to send a test email.
Commands
email-warning send test email
Syntax
Description
email-warning
Email warning setting
send
Send test email
test
Test email
Test email address
Defaults
N/A
Permission
Admin group
Usage
Guidelines
The test email will be sent to the mail address that “email-warning mail-address” command
configured.
Examples
NPort S9650I-16-2HV(config)# email-warning send test email
Sending test email ...
You may check if your dedicated email addresses have received this email!
2.2.70 email-warning event
Use the
email-warning event
global configuration command to enable the system warning events to send
through the email if the event occurs. Use the
no
form of this command to disable the specified warning event
notifications.
Commands
email-warning event { all | cold-start | warm-start | power-trans-off | power-trans-on |
config-change | auth-fail | topology-change }
no email-warning event { cold-start | warm-start | power-trans-off | power-trans-on |
config-change | auth-fail | topology-change}
Syntax
Description
email-warning
Email warning setting
event
System events
all
Enable all events
cold-start
Device server cold start
warn-start
Device server warm start
power-trans-off
Power transition (on->off)
power-trans-on
Power transition (off->on)
config-change
Configuration changed
auth-fail
Authentication failed
topology-change
Topology changed (from redundant protocols)
Defaults
All system events are disabled by default.
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config)# email-warning event cold-start
NPort S9650I-16-2HV(config)# email-warning event topology-change
NPort S9650I-16-2HV(config)# email-warning event auth-fail
