NPort 9000 Series CLI
Commands
2-86
2.3.5.5
no address-table
To remove an entry of the address table of the DNP3 protocol.
Commands
no address-table channel
id
Syntax
Description
address-table
To configure the address table of DNP3 mode.
channel
The channel ID of DNP3 address table
id
DNP3 channel id
Defaults
N/A
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config)# interface serial protocol dnp3
NPort S9650I-16-2HV (config-dnp3)# address-table
Address table :
Channel number Type Definition DNP3 Address
Range
----------------- ---------------- --------------------
--------------------------
1 DNP3 Serial Port 1 00001 –
00005
2 DNP3 Serial Port 2 00006 –
00010
3 DNP3 Serial Port 3 00011 –
00015
4 DNP3 Serial Port 4 00016 –
00020
5 DNP3 TCP 192.168.1.1 : 502 10000 – 11000
NPort S9650I-16-2HV (config-dnp3)# no address-table edit channel 5
