NPort 9000 Series CLI
Commands
2-7
password-policy
Display password policy settings
login-lockout
Display login lockout settings
logging-capacity
Display logging capacity settings
qos
Display QoS configuration
cos-to-queue
CoS to traffic queue mappings
dscp-to-queue
DSCP to traffic queue mappings
loopprotection
Display loop protection settings
s2n-conn
Display the running serial to network connections
serial-status
Display the running serial port current status
serial-error
Display the running serial port error count
serial-setting
Display the running serial port settings
serial-alias
Display serial port alias name
serial-param
Display serial port parameters
system-info
Display system related status
network-conn
Display network connection information
accounts
Show current account informations
Defaults
N/A
Permission
Admin group, User group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV# show version
Model Name : NPort S9650I-16-2HV
Firmware Version : V1.0
NPort S9650I-16-2HV# show interfaces serial protocol modbus
Serial protocol Modbus setting :
Initial delay : 0
Send TCP exception : disable
Modbus TCP listen port : 502
Modbus TCP response timeout : 1000
Slave ID Map :
Channel No. Type Definition Modbus Address Range
----------- ------------- ---------------------
--------------------
1 Modbus Serial Port 1 00001 - 00005
2.1.11 configure
Use the
configure
privileged command on the device server to enter configuration mode.
Commands
configure { terminal }
Syntax
Description
configure
Enter configuration mode
terminal
Configure from the terminal
Defaults
N/A
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9450I-2S-SC-HV# configure
NPort S9450I-2S-SC-HV(config)#
