Moxa Technologies NPort S9000 Series, Руководство пользователя

Страница: 71 / 93

NPort 9000 Series CLI Commands
2-64
2.3.3 Serial Interface Commands
From the CLI root directory, use the “configure” command to enter configure mode, and use the “interface
serial ” command to enter the serial interface folder. In the folder, users can set all serial-related settings.
2.3.3.1 email-warning event
Use the email-warning event serial interface configuration command to allow interface warning events to be
sent through the email if the event occurs. Use the no form of this command to disable the specified warning
event notifications.
Commands
email-warning event {dcd-changed | dsr-changed}
no email-warning event {dcd-changed | dsr-changed}
Syntax
Description email-warning Configure email warning.
event Port events.
dcd-changed DCD changed
dsr-changed DSR changed
Defaults All serial port events are disabled by default.
Permission Admin group
Usage
Guidelines N/A
Examples NPort S9650I-16-2HV(config)# email-warning event dcd-changed
NPort S9650I-16-2HV(config)# no email-warning event dsr-changed
2.3.3.2 port-alias
To configure the alias name for specified serial port.
Commands
port-alias
alias-string
no port-alias
Syntax
Description port-alias Configure alias name for serial port
Defaults N/A
Permission Admin group
Usage
Guidelines Alias: 1 – 16 characters
Examples
NPort S9650I-16-2HV(config)# interface serial 1
NPort S9650I-16-2HV(config-serif)# port-alias dev_serial_port1
NPort S9650I-16-2HV(config-serif)# no port-alias